¡@

Vertical plastic injection molding machine

Single Shuttle Table Type

       Features:
  • Built with single shuttle table, more convenience and safety for operation.
  • Vertical hydraulic clamping system. Suitable for insertion molding.
  • Available with TA-201 program controller or computerized LCD monitor NC control System, easy to maintain and operate the machine

 SPECIFICATION

Description
Type
/Unit
TA-2.5STS
TA-3.0STS
TA-4.0STS
TA-5.0STS
¡@
TA-6.0STS

¡@
¡@
TA-8.0STS

¡@
Screw Diameter mm 30 32 32 34 36 40 40 45 40 48 48 55
Injection Capacity g 78 90 100 110 120 130 130 160 130 180 180 250
Injection Pressure kg/cm2 1580 1430 1902 2012 2160 1650 1880 1520 1980 1720 1680 2030
Screw Speed r.p.m. 10-200 10-250 315 10-350 10-400 10-400
Injection Rate cm/sec 46 52 56 60 66 74 78 82 82 72 70 72
Clamping  Force ton 30 40 55 70 90 110
opening  Force ton 10 20 25 25 25 35
platen Size mm 550/390 580/490 650/510 680/510 720/520 830/580
Between Two Tie Bar mm 370 405 470 490 530 570
Max. Opening Daylight mm 330/245 400/275 400/350 470/420 470/420 550/500
Min. Mold Thickness mm 150/70 200/75 200/150 250/200 250/200 300/250
Opening Stroke mm 180 200 200 220 220 250
Ejectors Stroke mm 35 35 35 35 35 35
Max. Pump Pressure kg/cm2 140 140 140 160 160 160
Pump Motor HP/KW 5/3.5 7.5/5.5 10/7.5 15/20 15/20 25/30
Heater Capacity KW 2.8 3.0 3.5 4.5 4.5 5.5
Total  Wattage KW 7 9 12 19 23 28
Oil  Tank Capacity L 100 120 140 150 160 200
Machine Weight kg 1250 1600 1800 2200 2500 2800
Machine Size (LxWxH) cm 140x100x 230 150x110x 240 150x120x 240 150x120x 250 160x130x 250 190x145 270
Shipping Weight kg 1450 1800 1950 2500 27500 3100
Shipping size (LxWxH) cm 160x115x 230 185x125x  230 206x130x 230 210x130x 230 210x130x 230 210x130x 230
  • Figures shown herein are subject to change without notice.
  • Screw diameter and claming force can be design according customer's request.
    •

    Return to last page

    ¡@