¡@

Vertical plastic injection molding machine

Two shuttle Table Type

       Features:
  • One up mold and two down mold, high production capacity.
  • One worker operation, save labor cost.
  • Computerized LCD monitor NC control System, easy to maintain and operate the machine

              1 up mold & 2 down molds                                   1 up mold & 2 down molds

¡@

SPECIFICATIONS

Description
Type
/Unit
TA-2.5ST-SS
TA-3.0ST-SS
TA-4.0ST-SS
TA-5.0ST-SS
¡@
TA-6.0ST-SS

¡@
¡@
TA-8.0ST-SS

¡@
Screw Diameter mm 30 32 32 34 36 40 40 45 40 48 48 55
Injection Capacity g 78 90 100 110 120 130 130 160 130 180 180 250
Injection Pressure kg/cm2 1580 1430 1902 2012 2160 1650 1880 1520 1980 1720 1680 2030
Screw Speed r.p.m. 10-200 10-250 315 10-350 10-400 10-400
injection Rate kg/hr 46 52 56 60 66 74 78 82 82 72 70 72
Clamping  Force ton 30 40 55 70 90 110
opening  Force ton 10 20 25 25 25 35
platen Size mm 550/390 580/490 650/510 680/510 720/520 830/580
Between Two Tie Bar mm 370 405 470 490 530 570
Max. Opening Daylight mm 330/245 400/275 400/350 470/420 470/420 550/500
Min. Mold Thickness mm 150/70 200/75 200/150 250/200 250/200 300/250
Opening Stroke mm 180 200 200 220 220 250
Ejectors Stroke mm 35 35 35 35 35 35
Max. Pump Pressure kg/cm2 140 140 140 160 160 160
Pump Motor HP/KW 5/3.5 7.5/5.5 10/7.5 15/20 15/20 25/30
Heater Capacity KW 2.8 3.0 3.5 4.5 4.5 5.5
Total  Wattage KW 7 9 12 19 23 28
Oil  Tank Capacity l 100 120 140 150 160 200
Machine Weight kg 1600 2000 2200 2600 2700 3100
Machine Size (LxWxH) cm 130x205x 230 150x220x 235 175x240x 245 185x235x 260 185x235x 260 200x245 270
Shipping Weight kg 1800 2200 2500 2900 3000 3500
Shipping size (LxWxH) cm 205x175x 230 230x200x 235 245x240x 245 320x260x 260 320x260x 260 330x280x 270
  • Figures shown herein are subject to change without notice.
  • Screw diameter and claming force can be design according customer's request.
    •

    Return to last page

    ¡@

    ¡@