Rotational molding machine,Rotational plastic injection molding machine

Vertical plastic injection molding machine with rotary table

Rotary plastic injection molding machine

Features:

Rotary table could setup 2~4 down molds, thus the insertion process can be carried out at the same station ensuring higher efficiency and precision.
Rotary table is driven by hydraulic oil motor, smooth and steady location of the table by fixed pins ensure precise insertion of articles.
Easy installation of the mold and to adjust the central focal point.
Computerized LCD monitor NC control System, easy to maintain and operate the machine

1 up mold & 2 down molds

Description	Type /Unit	TA-3.5R		TA-4.5R		TA-6.0R		TA-8.0R		TA-10.0R
Screw Diameter	mm	28	32	32	36	36	42	42	48
Injection Capacity	g	67	88	92	117	117	160	200	260
Injection Pressure	kg/cm2	1445	1310	1340	1860	1900	2300	2500	2500
Screw Speed	r.p.m.	0-315		0-315		0-375		0-465
Screw Stroke	mm	140		140		145		180
Theoretical injection Volume	cm3	67	88	92	117	117	160	200	260
Injection Rate	cm3/sec	39	50	49	62			80	90
Clamping Force	ton	55		75		110		130		150
Opening Force	ton	6.5		8.3		15		20		20
Rotary Table Dimensions	mm	720		950		1092		1160		1500
Between Two Tie Bar	mm	740		870		1200		1220		1220
Max. Opening Stroke	mm	400(350)		470(400)		545(495)		545(485)		545(485)
Min. Mold Thickness	mm	200(150)		250(200)		300(250)		300(240)		300(240)
Ejectors Stroke	mm	50		50		70		70		70
Max. Pump Pressure	kg/cm2	140		140		160		160		160
Pump Motor	HP/KW	15		20		20		25		30
Heater Capacity	KW	3.2		3.5		5.0		7.5
Total Wattage	KW	13		18		25		30
Oil Tank Capacity	L	110		110		190		190
Machine Size (LxWxH)	cm	184x150x 290		190x160x 310		200x170x 340		185x240x280
Machine Weight	Tons	3.6		4.8		5.5		6.2
Shipping Size (LxWxH)	cm	194x140x 230		210x160x 230		2300x190x 230		190x245x225
Shipping Weight	Tons	4.0		5.4		6		7

Figures shown herein are subject to change without notice.

Screw diameter and claming force can be design according customer's request.